Nokia N86 User Manual page 153

Automatically to set the device to connect to the
destination using this access point automatically.
Select Options Advanced settings
>
following:
Network type — Select the internet protocol type to
●
transfer data to and from your device. The other
settings depend on the selected network type.
Phone IP address (for IPv4 only) — Enter the IP
●
address of your device.
DNS addresses — Enter the IP addresses of the
●
primary and secondary DNS servers, if required by your
service provider. To obtain these addresses, contact
your internet service provider.
Proxy server address
●
proxy server.
Proxy port number
●
proxy server.
WLAN internet access points
Select Menu Tools
>
Destinations Access
>
instructions on the display. Or, open one of the access
point groups, select an access point marked with
select Edit.
Use the instructions provided by your service provider to
edit the following:
© 2010 Nokia. All rights reserved.
and from the
— Enter the address of the
— Enter the port number of the
Settings and Connection
>
point, and follow the
WLAN network name
●
Search for networks. If you select an existing
network, WLAN network mode
mode are determined by the settings of its access
point device.
Network status
●
is displayed.
WLAN network mode
●
ad hoc network, and to allow devices to send and
receive data directly; a WLAN access point device is not
needed. In an ad hoc network, all devices must use the
same WLAN network name.
WLAN security mode
●
WEP, 802.1x
WPA2. If you select
used. The WEP, 802.1x, and WPA functions can be used
only if the network supports them.
Use access point
●
the device to ask for confirmation before the
connection using this access point is created or
>
Automatically
destination using this access point automatically.
To enter the settings for the selected security mode, select
, and
WLAN security
Advanced WLAN settings
Select Options
following:
— Select Enter manually
and
— Define whether the network name
— Select Ad-hoc
— Select the encryption used:
(not for ad hoc networks), or
Open network, no encryption is
— Select After confirmation
to set the device to connect to the
settings.
Advanced settings
>
or
WLAN security
to create an
WPA/
to set
and from the
153