Log; Text Input - Nokia RM-425 User Manual

RM-425_FCC.fm Page 21 Friday, February 29, 2008 5:20 PM
Options during a call
Many of the options that you can use during a call are network services. For
availability, contact your service provider.
Select Options during a call for some of the following options:
Transfer—to connect a call on hold to an active call and disconnect yourself
Replace—to end an active call and replace it by answering the waiting call
Send DTMF—to send DTMF tone strings (for example, a password). Enter the DTMF
string or search for it in Contacts. To enter a wait character (w) or a pause
character (p), press * repeatedly. To send the tone, select OK.
Call waiting (network service)
During a call, to answer the waiting call, press the call key. The first call is put on
hold. To end the active call, press the end key.
To activate the Call waiting function, select Menu > Settings > Phone sett. >
Phone > Call > Call waiting > Activate.
To switch between the two calls, select Swap.

■ Log

To view missed, received, or dialled calls, text messages, packet data connections,
and fax and data calls registered by the phone, select Menu > Log.
In the standby mode, you can use the call key as a shortcut to the Recent calls log
(a network service).
Note: The actual invoice for calls and services from your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
Note: Some timers, including the life timer, may be reset during service or software
upgrades.

4. Text input

When you write text,
predictive text input, or
predictive text input on or off when writing text, press # repeatedly until the
desired mode is active.
appears on the top right of the display, indicating
appears, indicating traditional text input. To set the
21