Draper HG2000 Instructions Manual

2000w hot air gun

Hide thumbs

Table Of Contents

Quick Links

Download this manual

2000W HOT AIR GUN

STOCK No.64261

PART No.HG2000

• INSTRUCTIONS •

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE

THE SAFE AND EFFECTIVE USE OF THIS TOOL.

12/2000

GENERAL INFORMATION

This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which

should be kept with the machine.

This manual describes the purpose for which this tool has been designed and contains all the necessary

information to ensure its correct and safe use.We recommend that this manual is read before any operation of

the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By

following all the general safety instructions contained in this manual, it will ensure both machine and operator

safety, together with longer life of the tool itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the

machine.

Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool

policy of continuous improvement determines the right to make modifications without prior warning.

Table of Contents

Need help?

Do you have a question about the HG2000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Draper HG2000

Page 1: General Information
12/2000 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of...
Page 2: Table Of Contents
Getting to Know your Hot Air Gun ..............6 Operation & Use ....................7 Applications .....................8 Optional Accessories ..................9 DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock No:- 64261. Part No:- HG2000.
Page 3 This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period .
Page 4: Power Supply
(i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug fitted.
Page 5: General Safety Instructions
IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you.
Page 6: Added Safety Rules For Hot Air Guns
ADDED SAFETY RULES FOR HOT AIR GUNS NOTE: A FIRE COULD ARISE IF THIS HOT AIR GUN IS NOT USED WITH CARE. 1. Ensure that the hot air gun is switched OFF before connecting to the power supply. 2. Do not use this hot air gun as a hair dryer. 3.
Page 7: Operation & Use
OPERATION & USE IMPORTANT - ensure that the machine is switched OFF before connecting to the power supply. ON/OFF SWITCH The ON/OFF switch has three positions/settings, (see Fig.1). This shows the switch in the off position. For low heat switch up to position 1 & for full heat switch into position 2.
Page 8: Applications
APPLICATIONS The following instructions should only be used as a guide as the ideal temperature should be Fig.3 ascertained by performing a test on the workpiece. Heating efficiency will vary depending on the properties of the workpiece, and the distance kept between the metal nozzle and the workpiece.
Page 9 APPLICATIONS DEFROSTING WATER PIPES Fig.6 Fig.6 IMPORTANT: Do not defrost plastic tubing/piping. Fit the reflector hook nozzle ✭✌ (not supplied see optional accessories, page 9). Switch the hot air gun on to the higher heat setting (2), gently heat the frozen area of the pipe starting from the edge of the area and moving in towards the centre.
Page 10: Optional Accessories
Please note all repairs/adjustments should be carried out by a qualified person. DRAPER HELPLINE: (023) 8049 4344 OPTIONAL ACCESSORIES The following accessories are available from your local Draper Stockist. GLASS PROTECTION NOZZLE WALL SCRAPERS Part No. AHG1 Part No. 4932S (50mm) Stock No.34410...
Page 11 NOTES - 10 -...
Page 12 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

This manual is also suitable for:

64261