Table of Contents
Advertisement
Status Windows
Status Windows
The Status windows provide options for viewing and managing a variety of system information.
The following sections describe the Status windows in detail:
•
•
•
•
•
System Window
The System window displays information about the IP camera.
To display the System window, access the configuration windows as described in the
Camera Windows" section on page
To make sure that the System window shows the most current information, click the Refresh button.
Table 3-20
Table 3-20
Option
System Status
Firmware Version
Hardware Version
Sensor Firmware
Version
MAC Address
Camera Name
Description
Date/Time
UDI
Note
Product Identifier
Version Identifier
Serial Number
Entity Name
Product Description
Cisco Video Surveillance 2611 IP Dome User Guide
3-36
System Window, page 3-36
Audio/Video Window, page 3-37
Network Window, page 3-38
Video Log Window, page 3-44
describes the options in the System window. All options are for display only.
System Window Options
Description
Version of the firmware that is installed on the IP camera.
Not used.
Version of the sensor firmware that is installed by the factory on the IP
camera.
MAC address of the IP camera.
Name of the IP camera, as configured in the Basic Setup window. For more
information, see the
Description of the IP camera, as configured in the Basic Setup window. For
more information, see the
Current date and time of the IP camera. To set the date and time, see the
"Basic Setup Window" section on page
The Unique Device Identifier (UDI) provides information about Cisco devices.
Cisco product ID of the IP camera.
Not used.
Serial number of the IP camera.
Cisco top level assembly part number of the IP camera.
Revision of the Cisco top level assembly part number.
Chapter 3
2-8, click Status, then click System.
"Basic Setup Window" section on page
"Basic Setup Window" section on page
Configuring and Managing the IP Camera
"Accessing the IP
3-5.
3-5.
OL-24128-02
3-5.
Hide quick links:
Advertisement
Table of Contents
