Cisco CIVS-IPC-2611 User Manual page 11

Chapter 1 Overview
Figure 1-2
Figure 1-2
5
4
3
2
1 USB port
2
Analog video output
3
Reset button
OL-24128-02
and the table that follows describe the items on the bottom of the 2611 IP dome.
Bottom of the 2611 IP Dome
Reserved for future use
3.5 mm video jack for video output to an analog monitor.
Recessed button that reboots the IP camera or resets it to a default
state. You can use a pin or paper clip to depress it. It can be used
any time that the IP camera is on and can have various effects, as
described in the
1
"Resetting the IP Camera" section on page
Cisco Video Surveillance 2611 IP Dome User Guide
IP Camera Overview
2-12.
1-5