Download Print this page
Cisco CIVS-IPC-5010 User Manual

Cisco CIVS-IPC-5010 User Manual

Cisco video surveillance 5010/5011 indoor fixed hd ip dome camera user guide

Advertisement

Quick Links

Introduction
The 5010/5011 cameras are fixed network dome cameras with a built-in Web-based viewer for live
streaming to a standard Web browser (Microsoft Internet Explorer 8).
The cameras support standard H.264 and MJPEG compression formats and dual video streams that can
be configured for a variety of resolutions, frame rates, and bit rates.
Each camera also includes a 2.8 - 8mm Varifocal Megapixel lens, a ready-to-install indoor enclosure,
and a mechanical IR cut filter for increased low-light sensitivity. Additional lenses are available, and the
cameras accept a wide range of megapixel varifocal CS-mount lenses.
The cameras also include built-in Power over Ethernet (PoE), which supplies power to the camera
through the network. If PoE is not available, the camera is prewired for 24 VAC.
Models
CIVS-IPC-5010
CIVS-IPC-5011

Getting Started

Before installing your network camera, thoroughly familiarize yourself with the information in this
section of the manual.
Note
OL-22669-02
Indoor fixed dome network camera, 2.1 megapixel, day/night, and a
2.8 ~ 8 mm varifocal megapixel lens. This camera has a clear dome.
Indoor fixed dome network camera, 2.1 megapixel, day/night, and a
2.8 ~ 8 mm varifocal megapixel lens. This camera has a smoked dome.
Do not use a network hub when configuring the network settings for the camera.
To ensure secure access to the network camera, place the camera behind a firewall when it is
connected to a network.
Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide
1
C H A P T E R
1-1

Advertisement

loading

Summary of Contents for Cisco CIVS-IPC-5010

  • Page 1: Getting Started

    Do not use a network hub when configuring the network settings for the camera. • To ensure secure access to the network camera, place the camera behind a firewall when it is connected to a network. Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide OL-22669-02...
  • Page 2: Parts List

    PoE. If PoE is not available, the camera is prewired for 24 VAC. 24 VAC Power Connections: Supports 24 VAC as the power source if PoE is not used. Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide OL-22669-02...
  • Page 3 Ethernet Activity/Link LED: Flashes green to indicate that data is being transmitted or received by the camera. Glows solid amber to indicate that a live network connection is established and then turns off after one minute of operation. Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide OL-22669-02...
  • Page 4: Product Label

    The product label lists the model number, date code, serial number, and Media Access Control (MAC) address. This information might be required for setup. The product label is located on the side of the back box. Cisco Video Surveillance 5010/5011 Indoor Fixed HD IP Dome Camera User Guide OL-22669-02...

This manual is also suitable for:

Civs-ipc-5011