Headpiece
To Replace the Headpiece:
• Turn the program control to the off (o) position.
• Remove the headpiece from the cable by holding the cable at its strain relief
portion and gently pulling the cable away from the headpiece.
• Insert the two-pin plug into the replacement headpiece. Take care to match the
larger pin on the plug to the larger hole of the headpiece connector.
• Repeat the system check, steps 1-3.
NOTE: Be sure the processor is turned off before removing the headpiece cable.
When replacing the processor headpiece we recommend that you consult with your
programming center to verify proper headpiece fi tting and sound quality adjustment.
32 User Guide for the Platinum Series Sound Processor