Auxiliary Jack - Advanced Bionics Platinum Series User Manual

Sound processor
Hide thumbs Also See for Platinum Series:
Table of Contents

Advertisement

Available languages

Available languages

Auxiliary Jack

The auxiliary jack is located on the side of the processor near the control panel. The
auxiliary microphone and telephone adapter provided with the system are connected
here. This jack is also used to connect other external auditory input sources, such
as battery-powered FM systems, MP3 players, television audio amplifi ers or other
assistive listening devices.
The Microphone Tester Earphones provided by AB are also connected here. When
the program switch is in the
assessment of the quality of the sound as it is received by the headpiece microphone.
Also, intermittencies in the headpiece cable may be detected. If a problem is noted,
please refer to the "Using the Platinum Series Sound Processor" section of this manual.
NOTE:
To use the auxiliary jack, the processor must contain a program set up
for auxiliary input. Consult with your audiologist regarding the correct
program position to use with auxiliary input.
CAUTION: Your PSP should be serviced only at AB. Do not attempt to open or
repair the processor. Unauthorized opening of the processor will void
the warranty.
8 User Guide for the Platinum Series Sound Processor
position, these earphones allow a subjective listening

Advertisement

Table of Contents
loading

Table of Contents