Figure 2: Headpiece Color Cap Removal Tool; Figure 3: Removing The Headpiece Color Cap - Advanced Bionics Platinum Series User Manual

Changing the Platinum Headpiece Color Cap:

Figure 2: Headpiece Color Cap Removal Tool.

1. Open the Headpiece by inserting the Headpiece Color Cap Removal Tool into
the slot above the headpiece cable connector and pushing the tool straight
back to lift the color cap as shown below.
Cable Connector

Figure 3: Removing the Headpiece Color Cap.

2. Close the headpiece by carefully aligning the Headpiece Color Cap on the
headpiece and pressing both parts together to snap them back into place.
NOTE: Make sure that no debris is blocking the microphone hole on
the headpiece.
10 User Guide for the Platinum Series Sound Processor