Cable; Figure 10: Headpiece With Cable - Advanced Bionics Platinum Series User Manual

Cable

The cable connects the headpiece to the processor and provides the pathway for
relaying information between the internal and external components of the system.
Cables are available in multiple lengths in either beige or brown. Each cable includes
a small clip that can be used with clothing to help hold the cable in place. At one end
of the cable is a two-pin plug that is inserted into the headpiece. Please note that the
pins are of different diameters and must be inserted correctly. A small coaxial plug is
located at the other end of the cable. This plug is inserted into the headpiece jack on
the processor.
To remove the cable from the headpiece, always hold the cable's strain relief (the
plastic plug) and gently pull it away. The cable should be removed from the head-
piece only when it is being replaced.
Headpiece
Microphone
2 Pin Plug
Cable
Cable Clip
Strain Relief
Strain Relief
Coaxial Plug

Figure 10: Headpiece with Cable.

NOTE: Be sure the processor is turned off before removing the cable from
the headpiece.
User Guide for the Platinum Series Sound Processor 13