Pnp/Pci Configurations; Pc Health Status - Gigabyte GA-G41MT-S2 User Manual

Hide thumbs Also See for GA-G41MT-S2:

User manual (40 pages)

Table Of Contents

Table of Contents

AC Back Function

Determines the state of the system after the return of power from an AC power loss.

Soft-Off

The system stays off upon the return of the AC power. (Default)

Full-On

The system is turned on upon the return of the AC power.

Memory

The system returns to its last known awake state upon the return of the AC power.

ErP Support

Determines whether to let the system consume less than 1W power in S5 (shutdown) state. (Default:

Disabled) Note: When this item is set to Enabled, the following four functions will become unavailable:

PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.

2-9 PnP/PCI Configurations

PCI1 IRQ Assignment

: Move

Enter: Select

F5: Previous Values

PCI1 IRQ Assignment

Auto

3,4,5,7,9,10,11,12,14,15

2-10 PC Health Status

Reset Case Open Status

Case Opened

Vcore

DDR15V

+3.3V

+12V

Current CPU Temperature

Current CPU FAN Speed

Current SYSTEM FAN Speed

CPU Warning Temperature

CPU FAN Fail Warning

SYSTEM FAN Fail Warning

CPU Smart FAN Control

: Move

Enter: Select

F5: Previous Values

Reset Case Open Status

Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous

chassis intrusion status and the Case Opened field will show "No" at next boot. (Default: Disabled)

Case Opened

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To

clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to

the CMOS, and then restart your system.