Power Management Setup - Gigabyte GA-G41MT-S2 User Manual

Parallel Port Mode
&
Selects an operating mode for the onboard parallel (LPT) port. Options are: SPP (Standard Parallel Port)
(default), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), ECP+EPP.
USB 1.0 Controller
&
Enables or disables the integrated USB 1.0 controller. (Default: Enabled)
Disabled will turn off all of the USB functionalities below.
USB 2.0 Controller
&
Enables or disables the integrated USB 2.0 controller. (Default: Enabled)
USB Keyboard Function
&
Allows USB keyboard to be used in MS-DOS. (Default: Disabled)
USB Mouse Function
&
Allows USB mouse to be used in MS-DOS. (Default: Disabled)
USB Storage Function
&
Determines whether to detect USB storage devices, including USB flash drives and USB hard drives during
the POST. (Default: Enabled)
2-8

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
ACPI Suspend Type
Soft-Off by PWR-BTTN
PME Event Wake Up
Power On by Ring
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
HPET Support
(Note)
HPET Mode
(Note)
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC Back Function
ErP Support
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
&
Specifies the ACPI sleep state when the system enters suspend.
S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state.

In S1 sleep state, the system appears suspended and stays in a low power mode.
The system can be resumed at any time.
S3(STR) Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state (default).

In S3 sleep state, the system appears to be off and consumes less power than in the
S1 state. When signaled by a wake-up device or event, the system resumes to its
working state exactly where it was left off.
(Note) Supported on Windows 7/Vista operating system only.
Power Management Setup
[S3(STR)]
[Instant-Off]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
[Enabled]
[32-bit mode]
[Disabled]
[Disabled]
Enter
[Soft-Off]
[Disabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 32 -
Item Help
Menu Level `
ESC: Exit F1: General Help
F7: Optimized Defaults