Standard Cmos Features - Gigabyte GA-G41MT-S2 User Manual

2-4

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
`
IDE Channel 0 Slave
`
IDE Channel 1 Master
`
IDE Channel 1 Slave
`
Halt On
Base Memory
Extended Memory
Total Memory
: Move Enter: Select
F5: Previous Values
Date (mm:dd:yy)
&
Sets the system date.
Time (hh:mm:ss)
&
Sets the system time.
IDE Channel 0, 1 Master/Slave
&
IDE Channel 0/1 Master/Slave, Extended IDE Drive

Configure your SATA devices by using one of the three methods below:
Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
•
None If no SATA devices are used, set this item to
•
detection of the device during the POST for faster system startup.
Manual Allows you to manually enter the specifications of the hard drive when the hard drive
•
access mode is set to CHS. (For IDE Channel 0 Master/Slave only.)
Access Mode Sets the hard drive access mode. (Default: Auto)

The following fields display your hard drive specifications. If you wish to enter the parameters manually,
refer to the information on the hard drive.
Capacity Approximate capacity of the currently installed hard drive.

Cylinder Number of cylinders.

Head Number of heads.

Precomp Write precompensation cylinder.

Landing Zone Landing zone.

Sector Number of sectors.

Halt On
&
Allows you to determine whether the system will stop for an error during the POST.
Options are: "All Errors," "No Errors," "All, But Keyboard" (default), "All, But Diskette," "All, But Disk/Key."
Memory
&
These fields are read-only and are determined by the BIOS POST.
Standard CMOS Features
Wed, Nov 30 2011
22:31:24
[None]
[None]
[None]
[None]
[All, But Keyboard]
640K
988M
990M
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 27 -
Item Help
Menu Level `
ESC: Exit F1: General Help
F7: Optimized Defaults
None so the system will skip the