Gigabyte GA-G41MT-S2 User Manual page 25

tRD Phase0 Adjustment
&
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase1 Adjustment
&
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase2 Adjustment
&
Options are: Auto (default), 0-Normal, 1-Advanced.
tRD Phase3 Adjustment
&
Options are: Auto (default), 0-Normal, 1-Advanced.
Trd2rd(Different Rank)
&
Options are: Auto (default), 1~15.
Twr2wr(Different Rank)
&
Options are: Auto (default), 1~15.
Twr2rd(Different Rank)
&
Options are: Auto (default), 1~15.
Trd2wr(Same/Diff Rank)
&
Options are: Auto (default), 1~15.
DIMM1 Clock Skew Control
&
Options are: Auto (default), +800ps~-700ps.
DIMM2 Clock Skew Control
&
Options are: Auto (default), +800ps~-700ps.
DDR Write Leveling
&
Allows you to determine whether to fine-tune memory parameters to enhance memory compatibility.
Auto Lets the BIOS decide whether to enable this function. (Default)

Enabled Enables this function to enhance memory compatibility.

Disabled Disables this function.

DDR Write Training
&
Allows you to determine whether to fine-tune memory parameters to enhance memory compatibility.
Auto Lets the BIOS decide whether to enable this function. (Default)

Enabled Enables this function to enhance memory compatibility.

Disabled Disables this function.

Channel A/B Driving Settings
&
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
x Driving Strength Profile
x Data Driving Pull-Up Level
x Cmd Driving Pull-Up Level
x Ctrl Driving Pull-Up Level
x Clk Driving Pull-Up Level
x Data Driving Pull-Down Lev
x Cmd Driving Pull-Down Lev
x Ctrl Driving Pull-Down Lev
x Clk Driving Pull-Down Lev
: Move Enter: Select
F5: Previous Values
Channel A/B Driving Settings
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 25 -
Item Help
Menu Level ```
ESC: Exit F1: General Help
F7: Optimized Defaults