Appendix C Messages Of Hard Disk And Disk Configuration Status - QNAP TS-401T Turbo Server User Manual

Appendix C
Configuration Status
Hard Disk
English Display
Ready
No disk
Invalid
R/W error
Disk Configuration/ RAID Configuration
English Display
Initializing
Formatting
Creating
Removing
Rebuilding
Checking
Messages of Hard Disk and Disk
The hard disk status is normal
No disk currently
Disk tray is not installed or there is main board
error. Users can check disk tray. If there is main
board error, please contact QNAP customer service.
Indicates the disk does not have a record on TS-401T
The disk is used on TS-401T the first time, or the
disk on the same TS-401T model is used. Users
can re-configure disk volume.
Disk fails
When R/W error is shown, users should back up
data immediately and replace the failed disk.
Initializing disk
Formatting disk
Creating RAID configuration
Removing RAID configuration
Rebuilding RAID configuration
Error checking on hard disk or disk configuration in
process
TS-401T will check disk automatically if it is shut
down improperly
- 144 -
Status Description
Status Description