Microtech USB XpressSCSI User Manual page 31

USER'S
USER'S
MANUAL
MANUAL
?
How many SCSI devices can I connect to the USB XpressSCSI Adapter?
A: You can connect up to 7 SCSI devices to the USB XpressSCSI.
?
The SCSI connector on my USB XpressSCSI does not appear to be the same as on my
SCSI device(s) — how do I connect them?
A. The SCSI connector on your USB XpressSCSI model may or may not be the appropriate
SCSI connector to use in your system configuration (depending on the SCSI connection
required for your hardware set up and the USB XpressSCSI model you purchased). You may
need to obtain an adapter to properly connect the USB XpressSCSI to your SCSI device(s).
You may also need to acquire additional SCSI cables if you would like to attach additional
SCSI devices. Some of your existing SCSI devices may have already included SCSI cables
which may be appropriate to use. For more information contact the manufacturer of your
SCSI device(s), your local computer dealer, or Microtech's Technical Support Department.
?
What are the main functions of the LED indicator on the USB XpressSCSI?
A. The LED is used to indicate the operating status of the USB XpressSCSI. The LED is
powered from termination power in a SCSI connection rather than from the USB bus. When
the LED is not lit it can be an indication that there is either a lack of termination power or an
improper SCSI connection. The LED will also flash on and off to indicate that the USB
XpressSCSI is being accessed/used by a connected SCSI device.
31
?
HELP
CONTENTS
USB XpressSCSI
BACK
CONTACT
NEXT