Feature Access Codes; Call Forward End Chaining; Call Forward Override - Mitel 5230 User Manual

Ip appliance

Hide thumbs Also See for 5230:

Table of Contents

5230 IP Appliance User Guide

Feature Access Codes

Feature Access Codes (FACs) are used to access telephony features using the dialpad.

Note: Not all features may be available on your system. Talk to your system administrator

for information on which features are available, and what are their feature codes.

To enable/disable Call Forward End Chaining

•

To enable Call Forward End Chaining, dial the Call Forward End Chaining FAC, then hang

up.

•

To cancel Call Forward End Chaining, dial the Cancel Call Forward End Chaining FAC,

then hang up.

Use this feature to prevent your call from being forwarded by another station.

To override a remote station's call forward

1. Dial the Call Forward Override FAC.

2. Call the extension of the remote station. The remote station will ring, and your call will not

be forwarded.

Call Park

Use this feature to pick-up a call parked by the attendant.

To retrieve a parked call

1. Lift the handset OR press the

2. Dial the Call Park FAC, the attendant's Console ID, then the Hold Slot number.

Call Pickup

Use this feature to answer a call ringing on another station.

To pick up a call

1. Lift the handset OR press the

2. Dial the Call Pickup FAC, then the extension of the ringing station.

key. OR or activate your headset.

Revision A

Table of Contents