Advanced Settings - Lennox Commercial Touchscreen Thermostat Owner's Manual

Advanced Settings

The thermostat has many advanced
settings to match the HVAC system.
These settings can be adjusted to match
specific needs:
1. From the main screen, press
SYSTEM. Five blank touch keys
show on the bottom of the screen
between DONE and CANCEL.
2. Press and hold the center blank
key approximately five seconds.
3. The Setup Number displays to the
lower-left area of the screen. It is a
four-digit code beginning with zero.
The current setting is displayed to
the right.
NOTE: To cycle through the Setup
Numbers, press the up or down arrow.
TUE
CHANGE FILTER UV LAMP
Inside
SYSTEM
OFF
COOL
DONE
26
Following
Schedule
PM
CANCEL
M22766
62-3071¿2