Lennox Commercial Touchscreen Thermostat Owner's Manual page 7

4. Press OCC 1. Once pressed, OCC 1 flashes to show it is selected.
5. Press Up and Down to modify time
and temperatures from this screen.
NOTE: Fan settings for the selected
period can be programmed for
ON or AUTO. See Fan Schedule
section for more information.
6. Press UNOCC1 and repeat step 5.
NOTE: With default settings, only
OCC 1 and UNOCC1 can
be configured. To use
OCC 2 and UNOCC2, enter
the Installer Setup and
change the appropriate
parameter.
7. Press OCC 2 and repeat step 5.
8. Press UNOCC2 and repeat step 5.
MON
OK TO PICK MULTIPLE DAYS
FAN
ON
AUTO
CANCEL
PERIOD
7
AM
HEAT
COOL
M22750
62-3071¿2