Dell 2208WFP User Manual page 17

Nature Mode Mode suitable for nature scenes.
Hue User Preset: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit
increments, from 0 to 100.
makes video image shade into greenish
makes video image shade into purplish
NOTE:
Saturation This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use - or + to
adjust the hue from '0' to '100'.
makes video image looks more monochrome
makes video image looks more colorful
NOTE:
Exit Menu
Push
DISPLAY
SETTINGS
Display
Display Setting submenu for VGA input
Setting
submenu
Back
Push
Horizontal Po
Use the
sition
NOTE:
Vertical Posit
Use the
ion
NOTE:
Sharpness This feature can make the image look sharper or softer.
Use
Pixel Clock The Pixel Clock and Phase adjustments allow you to adjust your monitor to your preference. These settings are accessed through the
main OSD menu, by selecting 'Display Settings'.
Use the
Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
(fine), again.
NOTE:
Display Info All the settings related to this monitor.
Display Reset Reset the image to the original factory setting.
Exit Menu
Push
OTHER
SETTINGS
Hue adjustment only available for video input.
Saturation adjustment only available for video input.
to exit the OSD main menu.
to go back to the main menu.
and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
When using DVI source, the Horizontal Position setting is not available.
and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
When using DVI source, the Vertical Position setting is not available.
and buttons to adjust the sharpness from '0' to '100'.
and buttons to adjust for best image quality.
Pixel Clock and Phase Adjustments are only available for "VGA" input.
to exit the OSD main menu.
Display Setting submenu for DVI-D input