Dtmf & Pulse - D-Link DVG-2024S User Manual

Voip gateway
Table of Contents

Advertisement

DVG-2024S User's Manual
3-4-5 DTMF & PULSE
Advanced Settings
Dial Wait Timeout: Enter the timeout duration after the user picks up the phone set.
Inter Digits Timeout: Enter the timeout duration between the intervals of each key pressed. When
exceeding the set timeout duration without entering further digits, the numbers entered will be dialed out.
Minimum DTMF ON Length (Dial on)/ Minimum DTMF OFF Length (Dial off - between tones): This
variable is to set the length of DTMF playback.
DTMF Detection Sensitivity: This variable is to set the sensitivity of the telephone keys for the VoIP
Gateway to detect the DTMF.
DTMF Output Volume: Adjust the Tx volume of FXS port for DTMF Caller ID or Out of Band DTMF.
Enable Out-of-Band DTMF: This variable is to set the method of DTMF transmission. RFC2833 or SIP
Info.
Note: Out-of-Band DTMF transport method varies from VoIP networks, please contact your VoIP
provider for the preferred method.
Enable Hook Flash Event: Select Auto, RFC2833, or SIP info for the signaling method of Hook Flash
Event.
Payload Type: payload type of RFC2833.
Volume: Select the volume of RFC 2833 from the drop-down menu.
D-Link Systems, Inc.
DTMF & PULSE
VoIP Gateway Configuration
52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents