Download Print this page

Using Sd/Mm Card; Start To Navigate - Vizualogic RoadTrip RT-043A Manual

Rear view mirror with gps
Hide thumbs

Advertisement

The device has a SD/MMC card slot which can be used for multimedia photos and music. To use the
SD/MMC card, insert a SD/MMC card into the slot of the device. With the connector pointing to the slot
and it's label facing the front of the device. To remove the card, first make sure that applications are not
accessing the card, then slightly push the top edge of the card to release. Then remove the card.
1) Put the card into the right side slot correctly.
) Do not take the card out when you are operating (such as read, copy etc.) the card, or the
data may install improperly.
3) Avoid using and storing the card under high temperature or high humidity.
4) Keep the card far away from liquid and caustic materials.
Navigation is the basic function of this device, below are three simple steps to operate the Navigation
software:
The first step: GPS positioning of your location
On the main menu, click the Navigation icon then the system will enter navigation mode. Click the
position button; the Gps will begin to orientate the location
position button; the Gps will begin to orientate the location.
The first time you power up the Navigation it may take up to 5 to 10 min before it picks up your
location.
The second step: Set the Destination
1) Click the destination button to enter the destination setting interface.
2) Click the "name search" to enter the input interface. Then type in the destination of the name you
want to research.
3) Click OK to enter the name. Then "choose a place" where you want to go to. Click the chosen place
to enter the map interface and set the chosen place as the destination.
The third step: Begin to Navigate
After setting the destination, return to the navigation menu, click the button "start to navigate". The
system will begin to navigate, then the system will remind you "start to navigate "with a navigation
voice.
4) When you reach about 300 meters from your destination, the system will remind you that you are
close to your destination with voice and enlarge the sample destination when you reach the destination.
Using SD/MMC Card

Start to Navigate

Advertisement

loading

  Related Products for Vizualogic RoadTrip RT-043A