Problems That Can Be Resolved Before Calling The Service Centre; Troubleshooting - DeLonghi EAM 4000 B Operating Instructions Manual

Table of Contents

Advertisement

36
LIGHTS
10
11
1 3 P R O B L E M S T H AT C A N B E R E S O LV E D B E F O R E C A L L I N G T H E S E R V I C E C E N T R E
If the machine is not working and an alarm light is on, the causes of the malfunction can be identified and resolved by
referring to chap. 12. If, on the other hand, no alarm light is on, run the following checks before calling the service
centre.
PROBLEM
The coffee does not come out
of one of the spouts.
The coffee is not creamy enou-
gh
The coffee comes out too
slowly
The coffee comes out too
quickly.
OPERATING INSTRUCTIONS
DESCRIPTION
After cleaning, the infuser has pro-
bably been left out of the coffee
The
light is on
maker
steady and the green
lights are flashing.
The inside of the machine is very
dirty.
The
light is
The ground coffee funnel is clog-
flashing
ged.
CAUSE
The cups have not been
preheated.
The infuser is too cold
The machine uses too little cof-
fee during the infusion process.
The coffee is ground too coarse
The ground coffee is not correct
The coffee is ground too fine.
The machine uses too much cof-
fee during the infusion process
The coffee is ground too
coarse
The machine uses too little cof-
fee during infusion.
MEANING
Insert the infuser, see par. 10.2
Thoroughly clean the inside of the
machine, as described in par. 10.2
Empty the funnel with the help of a
knife, as described in par. 7 note 5
(Fig.20).
Heat the cups by rinsing them in hot water
or leaving them to rest for at least 15 minu-
tes on the cup warmer tray on the lid (see
par. 5 note 3).
Heat the infuser by pressing the
before making the coffee (Fig. 14, see note 3,
chapter 5).
Turn the right-hand knob (Fig. 7) a little
clockwise (see chap. 5 note 2)
Turn the grinding adjustment knob (Fig. 17)
one click anticlockwise (see chap. 6).
Use another brand of coffee blend.
Turn the grinding adjustment knob (Fig. 17) one
click clockwise (see chap. 6).
Turn the right-hand knob (Fig. 7) a little anti-
clockwise.
Turn the grinding adjustment knob (Fig. 17) one
click anticlockwise (see chap. 6).
Turn the right-hand knob (Fig. 7) a little clockwi-
se.
ACTION
SOLUTION
button

Advertisement

Table of Contents
loading

Table of Contents