Making The Auto Cut Setting - Epson Stylus Pro 7800 User Manual

Amount of
Enlargement
4. Make the Auto Cut setting. For details, see "Making the Auto
Cut setting" on page 50.
5. Click OK.
6. Start printing your data from your application.

Making the Auto Cut setting

This setting is available only when Roll Paper or Roll Paper
(Banner) is selected as the Paper Source setting. You can select
how the paper is cut after printing.
Single Cut
Select this setting if you want to save paper. If you select this
setting, the boundary of a picture or the boundary of a page is cut.
However, the cut position may shift slightly.
50
Printing with Windows
When you select Auto Expand, the slider becomes
available. Using the slider, you can control the
amount of the image that extends beyond the
edges of the paper during borderless printing.
For most print jobs, Standard is recommended in
order to eliminate margins on all sides of the paper.
In a very humid environment, the width of paper
may expand due to moisture absorption. In this
case, move the slider to Max to eliminate margins
around the image. If Max is selected, the center of
the image may move about 1 mm to the right.
Moving the slider towards Min decreases the
amount of the image enlargement; however, as this
amount decreases, margins may appear on one or
more sides of the paper.