Network Settings - Network Menu - Epson PowerLite EBL630U User Manual

Event ID code
0892
0893
0894
0895
0898
0899
089A
089B
089C
089D
0920
Parent topic:
Related references

Network Settings - Network Menu

Related tasks
Setting Up Wireless Network Security
Network Settings - Network Menu
Settings on the Network menu let you view network information and set up the projector for control over
a network.
Cause and solution
The WPA/WPA2/WPA3 authentication type does not match. Make sure the wireless
network security settings are correct.
The WEP/TKIP/AES encryption type does not match. Make sure the wireless
network security settings are correct.
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Communication with a connected device was disconnected. Check your device's
connection status.
Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
If you are not using DHCP, turn off the DHCP setting in the Network menus.
A communication error has occurred. Try restarting the network software and
restarting your projector. If that does not solve the problem, contact Epson for help.
The EAP authentication type does not match the network. Check the wireless LAN
security settings and make sure that the security certificate is installed correctly.
EAP server authentication failed. Check the wireless LAN security settings and
make sure that the security certificate is installed correctly.
EAP client authentication failed. Check the wireless LAN security settings and make
sure that the security certificate is installed correctly.
Key exchange failed. Check the wireless LAN security settings and make sure that
the security certificate is installed correctly.
The internal battery that saves the projector's date and time settings is running low.
Contact Epson for help.
Administration Settings - Management Menu
254