Chapter 3
Installation
Automatic Setup
The AirNavigator CD can step you through installing your AirStation. Insert it into your Windows 7,
Vista, or Windows XP PC and follow the instructions on the screen. If your computer uses a different
operating system, use manual setup instead.
Manual Setup
Access Point mode
To use the AirStation as an access point, configure as below.
1
Make sure that you can connect to the Internet without the AirStation, then turn the
computer off.
2
Connect one end of the LAN cable to the router that you are currently using, and connect the
other end to the LAN port of the AirStation.
modem
3
Connect the AirStation to your computer with another LAN cable.
AirStation
WLAE-AG300N User Manual
1) connect
2) connect
router
1) connect
2) connect
LAN cable
AirStation
LAN cable
OFF
13