Buffalo AirStation Nfiniti WLAE-AG300N User Manual page 15

Chapter 3 Installation
4
Connect the power cable to the AirStation, then push the power button to turn it on. Wait 60
seconds, then power on your computer.
AirStation
5
After the computer has booted, the LEDs on the AirStation should be in the following
condidition:
Wireless
Status
6
Launch a web browser. If the home page is displayed, setup is complete.
You've completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.
WLAE-AG300N User Manual
OFF
1) connect
2) push
glowing green or amber.
glowing green.
14