Buffalo AirStation Nfiniti WLAE-AG300N User Manual page 10

Chapter 1 Product Overview
7
Status LED
Shows AirStation status.
On (Green) :
2 blinks (Green) :
1 blink (Red) :
*1
2 blinks (Red)
*1
3 blinks (Red)
*1
4 blinks (Red)
*1
Continuously
blinking (Red)
*2
*1 Turn off AirStation first, wait for a few seconds, then turn it back on.
*2 If the status LED keeps blinking, do not turn off the AirStation nor unplug its power
cable.
8
Power Button
Press the power button to turn on the AirStation. To turn it off, hold the power button down
for 5 seconds.
WLAE-AG300N User Manual
WDS is enabled as Master, or WDS is enabled as a Slave connected to the
Master.
WDS is enabled as a Slave, not connected to the Master.
RAM error.
: Flash ROM error.
: Wired Ethernet LAN error.
: Wireless LAN error.
Updating firmware, saving settings, or initializing settings.
:
9