Buffalo AirStation Nfiniti WLAE-AG300N User Manual page 34

Chapter 4 Configuration
Parameter
Broadcast SSID
[Allow multiple SSIDs]
[Use Single SSID]
SSID1
SSID2
SSID3
Separate feature
SSID
Wireless authentication
WLAE-AG300N User Manual
Meaning
If [Allow] is checked, then the AirStation will respond to SSID
searches from wireless devices by broadcasting its SSID. If [Allow] is
unchecked, then the AirStation ignores SSID searches from wireless
devices.
Clicking [Allow multiple SSIDs] will enable Multi Security, allowing
the use of multiple SSIDs, each with different wireless security
settings. Clicking [Use Single SSID] will disable the Multi Security
function. The AirStation will then allow one SSID and one type of
wireless security.
Note: When using Multi Security, you need to enable at least one of the
following: SSID1, SSID2, or SSID3.
Multi Security SSID1 can use WPA-PSK-TKIP or WPA/WPA2-Mixed for
wireless security.
Multi Security SSID2 can use WPA-PSK-AES for wireless security.
Multi Security SSID3 can use WEP for wireless security.
When [Separate] is enabled, wireless devices connected to the
AirStation can communicate only with the Internet side, not with
each other.
Set SSID using 1-32 alphanumeric characters.
Specifies an authentication method used when connecting to a
wireless device.
33