Buffalo AirStation Nfiniti WLAE-AG300N User Manual page 22

Chapter 4 Configuration
4
5
6
WLAE-AG300N User Manual
Highlight an AirStation to configure and
click [Next].
Check [Obtain IP address from DHCP
server] to have DHCP obtain an IP address
automatically, or you may enter IP address
settings manually. Click [Next].
Note: This screen may not be displayed
depending on your computer's IP address
settings.
Enter [root] for the user name and the
password that you set during initial setup.
Click [OK].
Notes: · By default, the password is blank (not set).
· If you forget your password, hold down
the reset button (page 7) to initialize all
settings. The password will then be blank.
Note that all other settings will also revert
to their default values.
21