Connections For A Standard-Defi Nition Tv - Cisco Explorer 4700 User Manual

Connections for a Standard-Defi nition TV

When using the set-top with an SDTV, you must make one of the following connections to view content. Some
SDTVs may not have all these connections. Refer to your TV user guide and the cabling diagrams in this guide for
more detailed information.
Note: The labeling on your set-top and SDTV may vary slightly.
Required Connections to an SDTV (use one)
The YPbPr connectors can provide standard-defi nition component
video signals to an SDTV.
Note: To connect YPbPr to an SDTV, you must set the HD Setup
Wizard on the set-top to HD Mode, and select the output video
format (typically 480i) that will match the capabilities of your SDTV.
The Cable Out connector provides a video and audio connection
to an SDTV.
Set-Top
Connections Connections
Pr
Y
Pb
Pb
L
Pr
Y
R
CABLE CABLE IN/
OUT
SDTV
L R
ANT IN
7