Welcome; Safety First; Identify Your Set-Top - Cisco Explorer 4700 User Manual

Welcome

® ®
The Cisco Explorer 4700 Family High-Defi nition Cable Set-Tops with Multi-Stream CableCARD
provide high-defi nition (HD) capability and broadband digital video services. On the MoCA
connection enables an IP LAN connection over coaxial cable, which minimizes the need for new wiring in the home.
Follow the instructions in this guide to install the set-top, to become familiar with the buttons on the front panel, and
to access your cable services. Then, enjoy the features of the set-top and change the way you watch TV.
Important: If the M-Card module is removed, the set-top will not operate correctly.
The consumer support website provides news and information about this product. For more information, please refer
to http://www.cisco.com/web/consumer/support/index.html

Safety First

Before using the set-top, read the Important Safety Instructions section of this guide.

Identify Your Set-Top

If the set-top requires troubleshooting in the future, your service provider may ask for the serial numbers of the
set-top and M-Card module.
The set-top serial number label is on the back panel of the set-top; the serial number begins with "STB SN" and is
located in the upper left corner of the bar code.
The M-Card serial number label is on the M-Card module slot cover; the serial number begins with "M-CARD SN"
and is located in the upper left corner of the bar code.
Use this space to record the set-top serial number: _______________________________________________
Use this space to record the M-Card module serial number: ________________________________________
Set-Top
VM S/N: VMCPRPSLV
Serial
Number
CM MAC: 0011BD73E17D9
M-Card M-CARD SN: PKCPTMFDV
Module
Serial
M-CARD MAC: 001BD746C7CB
Number
™ ™
(M-Card ) Interface
™
enabled 4742HDC, the MoCA
1