Parameters - Siemens 181 Workshop Manual

Parameters/address space

4.2 Parameters

4.2 Parameters
Parameters of the AI 4xRTD/TC 2-/3-/4-wire HF
The following table lists the configurable parameters. The effective range of the configurable
parameters depends on the type of configuration. The following configurations are possible:
● Distributed operation on PROFINET IO in an ET 200SP system
● Distributed operation on PROFIBUS DP in an ET 200SP system
When assigning parameters in the user program, use the WRREC instruction to transfer the
parameters to the module by means of data records, see section Parameter assignment and
structure of parameter data record (Page 52). The following parameter settings are possible:
Table 4- 3 Configurable parameters and their defaults (GSD file)
Parameter Value range
Diagnostics:
Disable
•
Missing supply
Enable
•
voltage L+
Diagnostics:
Disable
•
Reference
Enable
•
junction
Diagnostics:
Disable
•
Overflow
Enable
•
Diagnostics:
Disable
•
Underflow
Enable
•
Diagnostics:
Disable
•
Wire break
Enable
•
18
Default Reconfiguration
in RUN
Disable Yes
Disable Yes
Disable Yes
Disable Yes
Disable Yes
Analog input module AI 4xRTD/TC 2-/3-/4-wire HF (6ES7134-6JD00-0CA1)
Scope with configuration
software, e.g.,
STEP 7 (TIA Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Channel Channel
Channel Module
Channel Module
Channel
Channel Channel
Manual, 02/2014, A5E03573289-AD
1