Siemens 181 Workshop Manual page 45

Technical specifications
6.1 Technical specifications
Operational limit in entire temperature range
Voltage in relation to input range, (+/-)
Resistance in relation to input range, (+/-)
Basic error limit (operational limit at 25 °C)
Voltage in relation to input range, (+/-)
Resistance in relation to input range, (+/-)
Interference voltage suppression for f = n x (f1 +/-1%),
f1 = interference frequency
Series-mode interference (peak of the interference < rated
value of the input range), min.
Common mode voltage, max.
Common mode interference, min.
Interrupts/diagnostics/status information
Interrupts
Diagnostic error interrupt
Limit interrupt
Diagnostics alarms
Diagnostics
Monitoring of supply voltage
Wire break
Overflow/underflow
Diagnostics indicator LED
Monitoring of supply voltage
Channel status display
For channel diagnostics
For module diagnostics
Electrical isolation
Electrical isolation channels
Between the channels
Between the channels and the backplane bus
Between the channels and the supply voltage of the electronics Yes
Permitted potential difference
Between different circuits
Between the inputs (UCM)
Insulation
Insulation tested with
Dimensions
Width
Weights
Weight, approx.
44
Analog input module AI 4xRTD/TC 2-/3-/4-wire HF (6ES7134-6JD00-0CA1)
6ES7134-6JD00-0CA1
± 0.1%
± 0.1%
± 0.05%
± 0.05%
70 dB
10 V
90 dB
Yes
Yes; two high limits and two low
limits each
Yes
Yes
Yes; channel-based
Yes; channel-based
Yes; green PWR LED
Yes; green LED
Yes; red LED
Yes; green/red DIAG LED
No
Yes
75 VDC / 60 VAC (basic insulation)
10 VDC
707 VDC (type test)
15 mm
30 g
Manual, 02/2014, A5E03573289-AD