Siemens 340 Manual page 92

Connection
6.3 Connecting the push-in terminals
Procedure
Table 6- 1 Rigid conductors or conductors equipped with end sleeves
Step Operating instruction
1 Insert the cable into the oval opening as far as
it will go.
2 Pull on the cable to ensure it is tight.
Table 6- 2 Finely-stranded conductors
Step Operating instruction
1 Insert the screwdriver in the rectangular
opening to open the terminal (oval opening).
2 Insert the cable as far as it will go into the oval
opening and remove the screwdriver.
3 Pull on the cable to ensure it is tight.
92
Figure
Figure
SIRIUS 3RM1 motor starter
Manual, 11/2013, A5E0345285095020A/RS-AB/002