Setting The Alarm - Denon RCD-M39 Owner's Manual

Playing a USB memory device
n Switching the display
INFO
During playback, press .
File name
Title name /
Album name
• The characters that can be displayed are as follows:
A – Z a – z 0 – 9
! " # $ % & : ; < > ? @ l [ ] _ ` | { } ˜ ^ ' ( )
NOTE
• DENON will take no responsibility whatsoever for any loss or
damage to data on USB memory devices when using the USB
memory device connected to this unit.
• USB memory devices will not work via a USB hub.
• DENON does not guarantee that all USB memory devices will
operate or be suppled power. When using a USB connection type
portable hard disk of the type for which power can be supplied by
connecting an AC adapter, we recommend using the AC adapter.

Setting the alarm

This device can playback using the alarm playback (everyday alarm,
once alarm) and sleep timer.
Title name /
Artist name n Alarm operation when the time settings for
alarms overlap
When the sleep timer is set
• Automatically stops playback after the time set for the sleep timer
has elapsed.
+ , - . / = (space)
z
When the once alarm and everyday alarm are both
set (sleep timer is not set)
• Automatically starts playback at the earlier alarm start time set for
either of the alarms.
• Automatically stops playback at the earlier alarm stop time set for
either of the alarms.
If the current time is not set, enter alarm setting mode to get time
setting mode.
Setting the alarm
• Everyday alarm ("EVERYDAY ALARM")
Playback starts and stops (the power turns off) at the set times each
day.
• Once alarm ("ONCE ALARM")
Playback starts and stops (the power turns off) once only at the set
times.
1
2
3
4
5
21
Press SETUP .
ui
Use to select "ALARM
SETUP", then press ENTER or
p
.
ui
Use to select the alarm
mode, then press ENTER or p .
M O D E S E L E C T
O N C E A L A R M
ONCE ALARM EVERYDAY ALARM
ui
Use to select the source,
ENTER p
then press or .
S O U R C E S E L E C T
D I S C
DISC iPod/USB TUNER
DIGITAL IN ANALOG IN
Only when the "TUNER" function is selected
Use ui to select the preset number, then press
ENTER p
or .
• When no name has been registered for the selected preset
number, the frequency appears after the preset number is
displayed.