Listening To Fm Broadcasts; Tuning In Broadcast Stations; Automatically Presetting Fm Stations - Denon RCD-M39 Owner's Manual

Listening to FM broadcasts

Tuning in broadcast stations

Connect the antenna beforehand (vpage 6).
1
TUNER
Press to select the
reception band.
• When "FM AUTO" is selected:
"AUTO" is displayed.
• When "FM MONO" is selected:
"MONO" is displayed.
FM MONO FM AUTO
• You can also perform this operation by pressing 2 on the main unit.
• When the reception band mode is set to "FM AUTO", the "ST"
indicator lights when a stereo broadcast is tuned in.
2
TUNE –, +
Use to select the reception band.
When a station is received, the "TUNED" indication will light.
If the signal is weak and stable stereo reception is not possible, select
"FM MONO" to receive in monaural.
n To tune automatically
TUNE –, +
Press and hold in to tune in stations automatically.
• Stations whose signal is weak cannot be tuned in.
n To stop auto tuning
TUNE –, +
Press .

Automatically presetting FM stations

(Auto preset)
This unit can be preset with a total of 40 FM broadcast stations.
n Auto presetting with the remote control unit
Perform this operation when tuned to an FM broadcast station.
1
SETUP
Press .
2
Use ui to select "TUNER
ENTER p
SETUP", then press or
3
ui
Use to select "FM AUTO
PRESET", then press ENTER or
p
.
4
ENTER
Press while "PRESET
ENTER " is flashing.
Broadcast stations are preset
automatically.
n Canceling auto presetting
TUNER
Press or 2.
Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
NOTE
When FM auto preset is performed, the channel currently registered
as the FM preset is deleted, and the newly preset FM broadcast
station is registered to the same number as the deleted channel.
13
n Giving station names to preset channels
Names of up to 8 characters can be input.
1
Tune in the preset channel you
want to name.
2
ENTER
Press
The display switches to the station
name input display.
.
3
Input the station name.
Names of up to 8 characters can be input.
u i
• , button .......................... Selects the character.
p
• button ............................... Moves the cursor to the right.
CLEAR
• button ........................ Deletes the currently selected
• Characters that can be input.
4
Press ENTER
The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 4.
twice.
character.
A ~ Z, 0 ~ 9, ^ ' ( ) + , - . / = (space)
z
.