Pride Mobility Jazzy Select 14XL Owner's Manual page 24

V . C O M F O R T
Foot Platform Height Adjustment
The foot platform height is easily adjusted to different heights
in 1/2-in. increments.
To raise or lower the foot platform:
1. Remove the hardware from the foot platform bracket
as shown in figure 14.
2. Reposition the foot platform to the desired height.
3. Reinstall the hardware.
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a wrench.
See figure 14.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the adjustment
screw.
2. Turn the adjustment screw counterclockwise to raise
the front of the foot platform or clockwise to lower
the front of the foot platform.
Controller Position Adjustment
You can position the controller for either left-hand or right-
hand use.
WARNING! Do not place the controller
cable so that it can be pinched in the
seat frame or the power base frame.
To change the controller position:
1. Turn off the power to the controller.
2. Unplug the controller connector from the power base.
3. Cut the wire tie(s) securing the controller cable to the
armrest.
4. Flip up the armrest and loosen the setscrew. See figure
15.
5. Slide the controller out of the armrest.
6. Loosen the setscrew in the other armrest.
7. Place the controller in the other armrest.
8. Tighten the setscrew to secure the controller.
9. Route the controller cable to the back of the power
base and plug in the controller connector.
10. Use a wire tie to secure the controller cable to the arm-
rest. See figure 11.
24
A D J U S T M E N T S
ADJUSTMENT
SCREW
Figure 14. Foot Platform Adjustment
SETSCREW
Figure 15. Underside of Armrest
www.pridemobility.com
FOOT PLATFORM BRACKET
SECUREMENT NUT
CAP
Jazzy Select 14XL