ProForm XP160 User Manual page 7

5. Attach the Seat Frame (5) to the Seat Base (1)
with the indicated two M10 x 100mm Screws (45).
6. Attach the Backrest (11) to the Backrest Frame
(8) with four M6 x 15mm Button Screws (40).
7. Grease the M10 x 87mm Button Bolt (50). Attach
the Backrest Frame (8) to the Seat Frame (5)
with the Bolt and an M10 Nylon Locknut (41). Do
not overtighten the Locknut; the Backrest
Frame must be able to pivot easily.
Engage the Backrest Frame (8) with the Backrest
Knob (22) and fully tighten the Knob into the Seat
Frame (5).
8. Attach the Seat Bumper (27) to the Seat Frame
(5) with an M4 x 16mm Self-tapping Screw (38)
and an M4 Washer (39).
Grease an M10 x 82mm Button Bolt (49). Attach
the Leg Lever (6) to the Seat Frame (5) with the
Bolt and an M10 Nylon Locknut (41). Do not
overtighten the Locknut; the Leg Lever must
be able to pivot easily.
5
6
11
8
7
Grease
22
8
6
7
5
2
1
45
40
40
8
50
41
5
Grease
5
49
41
27
39
38
33