System Management; Time: Setting System Time - Thecus N2200 User Manual

System Management

The System Management menu gives you a wealth of settings that you can use to
configure your N2200's system administration functions. You can set up system
time, system notifications, and even upgrade firmware from this menu.

Time: Setting System Time

From the Time menu, choose the Time item and the Time screen appears. Set the
desired Date, Time, and Time Zone. You can also elect to synchronize the system
time on the N2200 with an NTP (Network Time Protocol) Server.
See the following table for a detailed description of each item:
Time
Item
Date
Time
Time Zone
Sync with external NTP
Server
WARNING
Description
Sets the system date.
Sets the system time.
Sets the system time zone.
Select YES to allow the N2200 to synchronize with an NTP server
of your choice. Press Apply to change.
If an NTP server is selected, please make sure your N2200's network has been
setup to access the NTP server.
27