To Correct Or Cancel An Automatic Timer Program; To Stop A Started Automatic Timer Program - Hitachi VT-FX6500A Owner's Manual

TO CORRECT OR CANCEL AN AUTOMATIC TIMER PROGRAM

1) Turn the power on.
2) Press the MENU button. The details of the your program appear on the TV screen.
1
3
5
3) Select the program which you want to correct or cancel using the PLAY/
• If the program you wish to correct or cancel is not on the screen, press the PLAY/
until your desired program appears.
NOTE: If some empty program numbers exist, the lower program number appears on the TV screen by
pressing the REW/ button.
In this case, you can enter the new program. Press the F.FWD/
then continue with the step [3] in the "AUTOMATIC TIMER RECORDING" section.
4) Press the F.FWD/ button.
ONE TIME PROGRAM
PROGRAM NUMBER
DATE
START TIME
END TIME
CHANNEL
REC SPEED
• To cancel the program, press the REW/
• To correct the program, go to the digit you want to change by using the F.FWD/
button. Then, enter the correct numbers using the
5) Press the RESET/EXIT button to return to original mode.
6) Press POWER button to return to timer stand-by mode.

TO STOP A STARTED AUTOMATIC TIMER PROGRAM

Press the STOP/EJECT button on the VCR.
NOTE: The STOP button on the remote control will not function in Automatic Timer Recording mode.
TIMER PROGRAMMING
DATE STA/END
05/04 07:30 PM
THU 08:30 PM
05/11 10:00 PM
W THU 10:54 PM
05/21 11:00 PM
DAILY 11:30 PM
1
05/04 THU
07:30 PM
08:30 PM
16
SP
button during the program number flashes.
CH
16
SP
125
SLP
40
SLP
button during program number flashes,
/PLAY or /STOP button.
39
or STOP/ button.
or STOP/ button
button or REW/