Timer Recording; Automatic Timer Recording - Hitachi VT-FX602S Owner's Manual

TIMER RECORDING

CH/SET)
2 Begin IRT
Press REC/IRT button on the VCR as many times as needed. The
recording length will be determined by the number of times you press
REC/IRT button.
Each additional push will increase the recording time by 30 minutes. It is
set up to 8 hours.
OTR (1:30)
SP
NOTES:
• Recording starts immediately when the REC/IRT button is pressed, whether
you are watching the same or a different channel.
• When REC/IRT button is pressed 18 times, the VCR returns to the normal
recording mode.
• To stop the IRT operation, press STOP button on the VCR or on the remote
control.
• The recording length time remaining is indicated on the display as the recording
is started.
• Recording stops when 0:00 is reached.
• Please note that in the SLP mode maximum recording time, assuming the tape
is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120).
• The TV that is connected to your VCR may be turned on or off during IRT.
• If the tape runs out before the end time, the VCR will switch to the Stop mode
immediately, eject the tape and the VCR power will be turned off.
TIMER RECORDING

AUTOMATIC TIMER RECORDING

You may set the VCR to start and end a recording while you are away.
You can set seven programs to record on specific days, daily or weekly
within a 1 year period.
In the example below, the timer is being set to record:
DATE:
or button.
6th May, 1996
- 51 -