Connecting Other Playback Equipment; Using Digital Audio Connections; Using Optical Digital Audio Connections - Bose LifeStyle DVD Entertainment System Operating Manual

~
I
CD changer or other playback equipment
Connecting other playback equipment
Other playback components such as an audio CD changer can be connected to the AUX
inputs on the rear panel of the media center.
AUX input connections
Using digital audio connections
If your TV, VCR, tape deck, or AUX component has electrical digital audio connections, you
may connect them to the media center using the corresponding DIGITAL connector. You will
need a 7512 cable with RCA connectors (such as a video cable).
) NtJ'B;e: Your system's DTS decoding is limited to playing back CDs and DVDs with DTS audio
tracks. DTS decoding of bitstreams from external sources is not supported. and your system
cannot provide DTS bitstreams to external devices.
Using optical digital audio connections
If your TV, VCR, tape deck, or AUX component has an optical digital audio connection, you
may connect it to the media center using the OPTICAL INPUT/OUTPUT connectors. You will
need an optical digital cable to make this connection.
) NtJ'B;@: Before you can listen to
a
source through the OPTICAL input. you need to assign the
OPTICAL connection to TV, VCR, TAPE
or
AUX. See your operating guide for instructions on
using the system settings menus.