Connecting Other Playback Equipment; Using Digital Audio Connections; Using Optical Digital Audio Connections - Bose LIFESTYLE BUILT-INvisible AV28 Installation Manual

Figure 11
AUX input connections

Using digital audio connections

Using optical digital audio connections

Connecting other playback equipment

Other playback components such as an audio CD changer can be connected to the AUX
inputs on the rear panel of the media center.
33V DC POWE R
1.1A
TV
SENSO R
AM
IR
ANTENNA
EMITTER
1 OPTICA L
SERIAL
DATA
2
INPU T
SPEAKER
ZONE S
If your TV, VCR, tape deck, or AUX component has electrical digital audio connections, you
may connect them to the media center using the corresponding DIGITAL connector. You will
need a 75Ω cable with RCA connectors (such as a video cable).
Note: Your system's DTS decoding is limited to playing back CDs and DVDs with DTS audio
tracks. DTS decoding of bitstreams from external sources is not supported, and your system
does not provide DTS bitstreams to external devices.
If your TV, VCR, tape deck, or AUX component has an optical digital audio connection, you
may connect it to the media center using the OPTICAL INPUT/OUTPUT connectors. You will
need an optical digital cable to make this connection.
Note: Before you can listen to a source through the OPTICAL input, you need to assign the
OPTICAL connection to TV, VCR, TAPE or AUX. See your operating guide for instructions on
using the system settings menus.
RECORD TAPE AUX VC R T V
VIDEO INPUTS
COMPOSITE
L L L L L
FM 75
R R R R R
OPTICA L
DIGI T AL DIGIT AL DIGI T AL DIGI T AL DIGI T AL DIGI T AL
OUTPU T
COMPOSITE
AUDIO OUTPUTS AUDIO INPUTS VIDEO OUTPUTS
AUDIO
OUT
R
L
CD changer or other playback equipment
Reference
S-VIDEO
S-VIDEO
13