Choosing A Mode For Audio Playback - Hitachi VTUX6430A Owner's Manual

Press the STOP button to stop the tape.
Notes:
• Use the CH ( or ) button to minimize any visual noise bands on the screen.
• After 1 minute in slow motion playback, the VCR will stop the tape automatically to prevent damage to the tape
and VCR.
Visual Search
This function let you search backward and forward through the videotape while viewing it.
During play:
Press the REW button to search in reverse.
Press the F.FWD button to search ahead.
• Press the PLAY button to return to normal playback.
Press REW or F.FWD and hold it; you can search backward or forward through the tape at a higher speed
while viewing it.
• Press PLAY and REW, then hold REW for backward search at a higher speed.
• Press PLAY and F.FWD, then hold F.FWD for forward search at a higher speed.
• Release REW or F.FWD to return to normal playback.

Choosing a mode for audio playback

The VCR records the same audio on both the Hi-Fi and linear tracks on the tape. The Hi-Fi sound is recorded on
separate left and right stereo channels. Monaural sound is recorded on the linear track.
To enjoy Hi-Fi sound, connect your VCR to a stereo television or amplifier/receiver using the audio/video jacks
(see page 52).
How to select playback audio
1 Press the GUIDE button.
2 Press the cursor button to select the SETUP option, and then press the ENTER button.