Preset; Processing; Save Preset - Omnia ONE Installation And Operation Manual

Preset

Omnia.ONE is equipped with a selection of factory presets that can be used to instantly configure the processing for
common applications. The currently loaded preset is displayed to the right of Preset: on the top line of the Main
Menu.
on Page 10) will open the Preset menu.
Highlighting Preset: and clicking the jog wheel (see Using the Jog Wheel
Rotating the jog wheel will scroll through all of the factory presets as well as any user presets that have been stored
within the unit's non-volatile memory. The currently loaded preset will appear with square brackets around it.
Clicking the jog wheel will load the displayed preset into the Omnia.ONE, instantly setting the various processing
parameters.
To exit the Preset menu without loading a preset, rotate the jog wheel clockwise until *cancel* is displayed and
click.
By alternately loading different presets you may compare the sound between them.
Here in the Preset: menu, you may select and load presets to use, but not save, delete, or rename them. Those
operations may be accomplished from within the Processing menu.

Processing

Highlighting and clicking Processing from the main menu opens up the Processing menu that contains these
options: Adjust Processing, Save Preset, Delete Preset, Rename Preset and <-Exit. This is where the sound of the
Omnia.ONE can be fine-tuned and customized. Once customized, this is also where your user presets are saved,
deleted and renamed. Each submenu in the Adjust Processing menu can be highlighted, clicked to open, and the
individual controls within can be adjusted to individual taste.
Since you cannot build a preset from scratch, a factory preset must be used as a starting point for creating your
"signature sound." Each processor parameter may be adjusted to taste as required. Once the processing is adjusted,
the Save Preset function is used to store your changes as a new user preset to non-volatile internal memory. The
factory presets cannot be overwritten.
Using the Delete Preset and Rename Preset options, existing user presets may be deleted from memory or renamed
as needed. The original factory presets can never be deleted or renamed.
We will discuss the Save Preset, Delete Preset, Rename Preset and <-Exit options first before delving into the
details of the Adjust Processing menu.

Save Preset

This option saves any changes you have made to the currently running preset into the Omnia.ONE's non-volatile
memory. Changes can be saved over an existing user preset (without renaming it) or as a new user preset with a new
name. You may not save a factory preset over itself with the same name and attempting this will generate the error
message: "Cannot overwrite factory preset. Save preset with new name."
Preset names can contain up to 10 characters.
To save your changes proceed as follows:
Highlight Save Preset and click. "Name" will be highlighted and the Name field will automatically display the
existing preset name. If you wish to overwrite this existing preset with your changes, just rotate the jog wheel
clockwise to highlight the Save button and click. Your changes will be saved to the existing preset.
82