Administrative - Omnia ONE Installation And Operation Manual

Administrative

About
Presents a dialog displaying the Omnia.ONE software style, firmware release version and front
panel software version currently active in the unit.
Contrast
Adjusts the contrast of the front panel LCD display to optimize it for various viewing angles.
Network Configuration
Allows customization of the network interface configuration. Available parameters are:
IP (IP Address)
Accepts data in the form of four octets to describe the Ipv4 network address assigned to
the Omnia.ONE's network interface. The entries have the form of:
[ octet] . [ octet] . [ octet ] . [ octet] which when entered may appear as a network address such as:
Subnet (Subnet Mask)
Accepts data in the form of four octets to describe the Ipv4 network subnet mask of the
Omnia.ONE's network interface. The entries have the form of:
[ octet] . [ octet] . [ octet ] . [ octet] which when entered may appear as a network address such as:
Gateway
Accepts data in the form of four octets to describe the Ipv4 gateway address assigned to
the Omnia.ONE's network interface. The entries have the form of:
[ octet] . [ octet] . [ octet ] . [ octet] which when entered may appear as a network address such as:
<-Exit
Click on this option to return to the Administrative menu.
Reboot
When selected, initiates a complete system reset, which includes reloading the internal operating
system, DSP processing code, and values from the current processing preset and IO configuration.
Security
Remote Con (Remote Control)
[Enabled]
[Disabled]
Enter Password
Sets the password for both the front panel and remote control access.
The default password is "omnia" (all lower case)
192 . 168 . 0 . 200
255 . 255 . 255 . 0
192 . 168 . 0 . 1
Enables remote control access.
Disables remote control access.
57