Canon VB-C50i User Manual page 208

Log Messages
●A015 WebView Administrator Viewer start (info)
Message
%1
%2
Explanation
●A016 Amount of transmitted video data (info)
Message
%1
%2
%3
%4
%5
Explanation
●A022 Applet archive load failure (warning)
Message
%1
Explanation
Response
●A023 Detection in change of point of contact (err)
Message
%1
%2
Explanation
7-6
%1@%2 privilege granted
Type of clients (LS/C | LS/D)
Client host IP address
The WebView Administrator Viewer has started operation.
%1@%2 %3 frames / %4 bytes in %5 seconds
Client type (LS/D | LS/H)
Client host IP address
Number of frames
Number of bytes
Video transmission time
This shows the results of video transmission for a video transmission client.
archive/%1 not found
Applet archive name (glimpse.cab | glimpse.zip | lvapplet.cab | lvapplet.zip |
imagemap.gif | digits.gif)
Applet archive file does not exist or is corrupted.
Copy the missing (or damaged) file in the '/archive' applet from the CD-ROM
and reboot.
a %1 detected at In%2
point of contact device input change (front-edge | rear-edge | pulse | notch)
Point of contact input terminal number (1 to 2)
A change was detected at point of contact device terminal In1 or In2.
front-edge denotes OFF → ON, rear-edge denotes ON → OFF, pulse
denotes OFF → ON → OFF, and notch denotes ON → OFF → ON. pulse
and notch are brief (10-20 milliseconds) ON and OFF periods detected
during OFF and ON states respectively.