Installation Options - AT&T TL7610 Quick Start Manual

Getting started
Headset base installation

Installation options

IMPORTANT: If you purchased model TL76, or if you purchased
a model TL7000 handset lifter (purchased separately), follow the
installation instructions in the TL7000 handset lifter manual and
then skip to page 3 of this �uick start guide. skip to page 3 of this �uick start guide. page 3 of this �uick start guide.
If you purchased model TL760 (without handset lifter), you have
three installation options:
Option : Use the headset with a single standard telephone line
with a corded or cordless telephone. This option uses
the included line splitter to connect the headset to a
telephone.
Option 2: Use the headset with a single standard telephone line as a
stand-alone product.
Option 3: Use the headset with a multiple line corded telephone
(such as the AT&T 080, 070, 040) or a digital business
system (such as a proprietary PBX telephone system). This
option uses the curly cord of the corded telephone to
connect to the headset base and re�uires the TL760 to
be in LIFTER MODE to operate. You may need to change
the LIFTER AUDIO ADJUST settings on the base to
ensure correct operation (see page 2).
Cord labels
The cords provided with your headset have colored labels
attached to help you plug them into the headset base. The back
of the headset base has colored dots above the jacks, and the
jack names on the rear bottom plastic piece of the headset base
that correspond to the colored labels on the cords.
If you are using installation option 3, you can attach the provided
light blue colored label to the end of your telephone curly
handset cord that you plug into the headset base.
5