AT&T TL7610 Quick Start Manual page 12

Getting started
MODE
Headset base installation
No lifter mode or lifter mode
There are two answer modes available on the
headset base. The current mode is indicated
by two lights on the front of the headset base
named NO LIFTER MODE and LIFTER MODE.
• When plugging your headset base into the
telephone wall jack (installation option  or 2),
make sure the headset base mode is set to NO
LIFTER MODE.
-OR-
• When connecting your headset base to a
multiple line corded telephone (installation
option 3), make sure the headset base mode
is set to LIFTER MODE and the LIFTER AUDIO
ADJUST setting is correct (see page 2).
To change the answer mode:
When the headset is not in use, press MODE on
the headset base to select NO LIFTER MODE or
LIFTER MODE. The corresponding light on the
front of the headset base turns on to indicate the
current mode.
For complete instructions on installing and
using the handset lifter, see the TL7000 handset
lifter user's manual. You may also download the
www.telephones.att.com
manual at
NOTE: If you are using the handset lifter (model TL76, or
sold separately as model TL7000), you must use the LIFTER
MODE.

.